*****************************************************************************
*                                                                           *
*                        PCMCIA Fast Ethernet Card                          *
*                                                                           *
*                       Windows NT 4.0 Installation                         *
*                                                                           *
*****************************************************************************

   Windows NT 4.0 provides support for PCMCIA adapters.
   Before installing your PCMCIA Fast Ethernet Card, please make sure
   the PCMCIA device is started and working.  You can check
   the status of the PCMCIA device by double clicking the "Devices"
   icon in the Control Panel.  If the PCMCIA device is not
   started, you can click the "Start" button to start it.

   Windows NT 4.0 Driver Installation Steps:

   1. Insert PCMCIA Fast Ethernet Card in one of the PCMCIA Slots.

   2. Start Windows NT 4.0.

   3. Double click the "Control Panel/Network" icon.  Select
      "Adapter", and click the "Add" button.  Insert the driver
      diskette in the floppy drive (e.g. A:) and click the
      "Have Disk" button.

   4. Enter "A:\WINNT" and click the OK button.

   5. Select the "PCMCIA Fast Ethernet Card" from the dialog
      box and click OK to continue.

   6. Select IRQ, I/O address and Connection Type, and click OK.
      The system will copy the driver files to the hard disk.

   7. The installation prompts you for the required TCP/IP setup
      information. Please enter all the required information.

   8. Restart the computer.


*** All trademarks or brand names mentioned are trademarks or
    registered trademarks of their respective companies.

